banner
buttonhomeltbuttcompanyltbuttproductsltbuttcontactsltbuttonnewslt
buttonliterature

SITE MAP

BULK BAG DISCHARGERS

Also referred to as: big bag dischargers, super sack dischargers, super sack unloaders, bulk bag unloaders, FIBC dischargers, FIBC unloaders

Discharging with height restriction - Low Loader Model T5.

low loader t5

SELECT FOR INFORMATION ON OUR COMPREHENSIVE RANGE OF PRODUCTS.

Spiroflow's T5 Low Loading Discharger empties bulk bags and small bags in process areas where restricted headroom causes problems in handling bags or where only a low fork lift truck is available.
The discharger is coupled directly to a flexible spiral or other suitable conveyor which meters ingredients from the bag either by volume or by weight. Ingredients may then be fed direct to either mixing or other process equipment to provide a fully automatic ingredients unloading, proportioning and transfer system.
The height of the access door has been designed to receive small bags, which is of particular benefit to processors who have switched over to bulk bags, but still continue to receive minor ingredients in 50lb bags.

flexible screw conveyors
aero mechanical conveyors
vacuum conveyors
bulk bag dischargers
bulk bag fillers
bag packers
bin, bag & drum emptiers

OPERATION:

Processors with batching operations may choose to have several bag frames for use with one discharge station, allowing them to partially empty, re-tie and store bulk bags.

operation pic 1operation pic 2
product range

2. The frame has fork channels at its base and needs only to be lifted on to the discharger base.

FEATURES:

1. The top section of the discharger is a removable frame on to which the bulk bag is loaded at ground level. The frame is spring loaded to tension the bag during discharge.

Removable top frame.
 

Dust-tight spring loaded docking seal.
 

Bag tensioner ensures total emptying.
 

Integral conveyor or feeder.
 

Dust control.

operation pic 4
operation pic 3

OPTIONS:

Loss-in-Weight batch control.

Bag massagers to aid flow.

Bag spout closure bars for dust-free and easy untying and retying of bag.

Mobile frame.

Sack tip door.

Liner remover.

4. When the bag is untied, the access door is closed and the clamp opened to release the bag contents, either partially or fully depending on the flow rate required and the flow properties. For poor flowing or compacted materials, 'massage' plates are fitted to assist flow from the bag.

3. The discharger base unit has a dust-tight docking seal on to which the top frame and bag is placed.
A spout clamp allows the bag to be untied without dust emission or spillage, via an access door.

BACK TO DISCHARGER MODEL RANGE

circbuttonlt1

Can we discharge your product?
Check out the list of materials handled by Spiroflow equipment

OPTIONAL EQUIPMENT

previousnext