Home

Flexible Screw Conveyors

Some basic facts about Spiroflow flexible screw conveyors.

  1. Electric motor: 3 phase, 50/60hz, voltage as specified. Special motors are also available to your specification. Fixed or variable speed.
  2. Motor adaptor and spiral connector in mild steel or stainless steel.
  3. 45 degree or horizontal outlet assembly in mild steel/painted, or stainless steel.
  4. Dust-tight tube fitting.
  5. High and low level control.
  6. Abrasion resistant polymer outer tube.
  7. Flexible spiral in spring steel or stainless steel.
  8. Inlet assembly in mild steel/painted, or stainless steel.
  9. Feed restrictor to regulate material flow.
  10. Feed hopper in standard size or to customer's specifications.
  

Model Specifications

Throughput rates may vary depending on bulk density, material flow characteristics, and length and elevation of conveyor.

We recommend material testing to determine correct model.		  

Conveyor configurations

Maximum length is typically 45 feet for material bulk density 0.6kg/litre and may be increased or decreased inversely with bulk density.

Vertical installations are generally limited to 18 feet.		  

Spiroflow flexible screw conveyor spiral selection.

The ROUND SPIRAL forces some of the solids outwards between the spiral and the tube, which reduces friction and lowers the load on the drive motor. Its gentle tumbling action disperses the product within the tube, preventing separation of mixtures, actually aiding the mixing process. Round spirals provide the best combination of conveying and mixing efficiency, strength and long life.

The FLAT SPIRAL , manufactured from rectangular wire, directs more positive forward force in the direction of flow and increases capacity slightly. It is particularly suitable for light, aerated or very fine materials which demand a greater surface area to assist their movement, with less fallback. Typical applications would be for talcum powder, fire extinguisher powder, filter aids (e.g. diatomaceous earth).

The FLAT SPIRAL , manufactured from rectangular wire, directs more positive forward force in the direction of flow and increases capacity slightly. It is particularly suitable for light, aerated or very fine materials which demand a greater surface area to assist their movement, with less fallback. Typical applications would be for talcum powder, fire extinguisher powder, filter aids (e.g. diatomaceous earth).

The CENTRE CORE is used for:

  1. Very light materials that fluidise readily.
  2. Conveyors inclined more than 60°.
  3. To prevent flooding/ overfeeding of certain solids in short or horizontal conveyors.
NOTE: All spirals are heat treated to provide strength and long life. For products with high bulk densities, a heavy duty spiral may be specified, used in conjunction with a steel outer tube for abrasive products.

page 1

page 3